Milling

Corner Radius End Mill: 0.031" Dia, 3/32" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End (Pkg Qty=1)Item not...

Corner Radius End Mill: 0.031" Dia, 3/32" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End (Pkg Qty=1)Item not returnable!

Corner Radius End Mill: 0.04" Dia, 0.12" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End (Pkg Qty=1)Item not...

Corner Radius End Mill: 0.04" Dia, 0.12" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End (Pkg Qty=1)Item not returnable!

Corner Radius End Mill: 0.065" Dia, 0.195" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End (Pkg Qty=1)Item not returnable! ...

Corner Radius End Mill: 0.065" Dia, 0.195" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End (Pkg Qty=1)Item not returnable!

Corner Radius End Mill: 0.08" Dia, 0.24" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, AlTiN Coated, Single End, Series Miniature End Mills - Corner Radius -...

Corner Radius End Mill: 0.08" Dia, 0.24" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, AlTiN Coated, Single End, Series Miniature End Mills - Corner Radius - Stub & Standard (Pkg Qty=1)Item not returnable!

Corner Radius End Mill: 0.085" Dia, 0.255" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, AlTiN Coated, Single End, Series Miniature End Mills - Corner Radius -...

Corner Radius End Mill: 0.085" Dia, 0.255" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, AlTiN Coated, Single End, Series Miniature End Mills - Corner Radius - Stub & Standard (Pkg Qty=1)Item not returnable!

Corner Radius End Mill: 0.09" Dia, 0.27" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End (Pkg Qty=1)Item not...

Corner Radius End Mill: 0.09" Dia, 0.27" LOC, 0.005" Radius, 4 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End (Pkg Qty=1)Item not returnable!

Woodruff Keyseat Cutter: 0.062" Cut Dia, 0.02" Cut Width, 1/8" Shank Dia, Straight Tooth 1-1/2" OAL, 4 Teeth, Solid Carbide (Pkg Qty=1)Item not returnable!

Woodruff Keyseat Cutter: 0.062" Cut Dia, 0.02" Cut Width, 1/8" Shank Dia, Straight Tooth 1-1/2" OAL, 4 Teeth, Solid Carbide (Pkg Qty=1)Item not returnable!

Drill Mill: 3/8" LOC, 4 Flutes, 82 ° Point, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, AlTiN Finish (Pkg Qty=1)Item not returnable!

Drill Mill: 3/8" LOC, 4 Flutes, 82 ° Point, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, AlTiN Finish (Pkg Qty=1)Item not returnable!

Drill Mill: 1/8" Dia, 1/2" LOC, 4 Flutes, 82 ° Point, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, Uncoated (Pkg Qty=1)Item not returnable!

Drill Mill: 1/8" Dia, 1/2" LOC, 4 Flutes, 82 ° Point, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, Uncoated (Pkg Qty=1)Item not returnable!

Square End Mill: 3/32" Dia, 2 Flutes, 9/64" LOC, Solid Carbide, 30 ° Helix AlTiN Coated, 1/4" Shank Dia, 4" OAL, Centercutting (Pkg Qty=1)Item not returnable!

Square End Mill: 3/32" Dia, 2 Flutes, 9/64" LOC, Solid Carbide, 30 ° Helix AlTiN Coated, 1/4" Shank Dia, 4" OAL, Centercutting (Pkg Qty=1)Item not returnable!

Double Angle Milling Cutter: 90 °, 1/8" Cut Dia, 1/16" Cut Width, 1/8" Shank Dia, Solid Carbide 2" OAL, Uncoated, 4 Teeth (Pkg Qty=1)Item not returnable!

Double Angle Milling Cutter: 90 °, 1/8" Cut Dia, 1/16" Cut Width, 1/8" Shank Dia, Solid Carbide 2" OAL, Uncoated, 4 Teeth (Pkg Qty=1)Item not returnable!

Engraving Cutter: 60 °, 3/16" Dia, 0.02" Tip Dia, Tipped Off Point, Solid Carbide AlTiN Finish, 0.145" LOC, 3/16" Shank, 2" OAL, 1 Flute, Use on Ferrous & Non-Ferrous Metals (Pkg Qty=1)Item not...

Engraving Cutter: 60 °, 3/16" Dia, 0.02" Tip Dia, Tipped Off Point, Solid Carbide AlTiN Finish, 0.145" LOC, 3/16" Shank, 2" OAL, 1 Flute, Use on Ferrous & Non-Ferrous Metals (Pkg Qty=1)Item not returnable!