Milling

SGS 32319 Tapered End Mill: 2 ° per Side, 3/16" Small Dia, 1-3/4" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 2 ° per Side, 3/16" Small Dia, 1-3/4" LOC, 3 Flutes, Solid Carbide,...

SGS 32319 Tapered End Mill: 2 ° per Side, 3/16" Small Dia, 1-3/4" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 2 ° per Side, 3/16" Small Dia, 1-3/4" LOC, 3 Flutes, Solid Carbide, Square End 3/8" Shank Dia, 3-1/2" OAL, Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32321 Tapered End Mill: 3 deg Angle per Side, 5/32" Small Dia, 1-3/4" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 3 deg Angle per Side, 5/32" Small Dia, 1-3/4" LOC, 3 Flute, Solid...

SGS 32321 Tapered End Mill: 3 deg Angle per Side, 5/32" Small Dia, 1-3/4" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 3 deg Angle per Side, 5/32" Small Dia, 1-3/4" LOC, 3 Flute, Solid Carbide, Square End 3/8" Shank Dia, 3-1/2" OAL, Bright/Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32323 Tapered End Mill: 5 ° per Side, 1/8" Small Dia, 1-1/2" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 5 ° per Side, 1/8" Small Dia, 1-1/2" LOC, 3 Flutes, Solid Carbide, Square...

SGS 32323 Tapered End Mill: 5 ° per Side, 1/8" Small Dia, 1-1/2" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 5 ° per Side, 1/8" Small Dia, 1-1/2" LOC, 3 Flutes, Solid Carbide, Square End 3/8" Shank Dia, 3-1/2" OAL, Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32325 Tapered End Mill: 7 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 7 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End 3/8"...

SGS 32325 Tapered End Mill: 7 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 7 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End 3/8" Shank Dia, 3-1/2" OAL, Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32327 Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 3/4" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 3/4" LOC, 3 Flutes, Solid Carbide, Square...

SGS 32327 Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 3/4" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 3/4" LOC, 3 Flutes, Solid Carbide, Square End 3/8" Shank Dia, 3-1/2" OAL, Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32329 Tapered End Mill: 1 ° per Side, 1/4" Small Dia, 2" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 1 ° per Side, 1/4" Small Dia, 2" LOC, 3 Flutes, Solid Carbide, Square End 1/2"...

SGS 32329 Tapered End Mill: 1 ° per Side, 1/4" Small Dia, 2" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 1 ° per Side, 1/4" Small Dia, 2" LOC, 3 Flutes, Solid Carbide, Square End 1/2" Shank Dia, 4" OAL, Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

Made in USA 32332-00-D Square End Mill: 3/8" Dia, 1" LOC, 3 Flutes, Solid Carbide Square End Mill: 3/8" Dia, 1" LOC, 3 Flutes, Solid Carbide 2-1/2" OAL, 3/8" Shank Dia, 35 ° Helix, Single End,...

Made in USA 32332-00-D Square End Mill: 3/8" Dia, 1" LOC, 3 Flutes, Solid Carbide Square End Mill: 3/8" Dia, 1" LOC, 3 Flutes, Solid Carbide 2-1/2" OAL, 3/8" Shank Dia, 35 ° Helix, Single End, Bright/Uncoated, Series AFI (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32333 Tapered End Mill: 2 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 2 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide,...

SGS 32333 Tapered End Mill: 2 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 2 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide, Square End 1/2" Shank Dia, 4" OAL, Bright/Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32335 Tapered End Mill: 3 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 3 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide,...

SGS 32335 Tapered End Mill: 3 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 3 deg Angle per Side, 1/4" Small Dia, 2" LOC, 3 Flute, Solid Carbide, Square End 1/2" Shank Dia, 4" OAL, Bright/Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32337 Tapered End Mill: 5 deg Angle per Side, 1/4" Small Dia, 1-1/4" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 5 deg Angle per Side, 1/4" Small Dia, 1-1/4" LOC, 3 Flute, Solid...

SGS 32337 Tapered End Mill: 5 deg Angle per Side, 1/4" Small Dia, 1-1/4" LOC, 3 Flute, Solid Carbide, Square End Tapered End Mill: 5 deg Angle per Side, 1/4" Small Dia, 1-1/4" LOC, 3 Flute, Solid Carbide, Square End 1/2" Shank Dia, 4" OAL, Bright/Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32339 Tapered End Mill: 7 ° per Side, 3/16" Small Dia, 1-1/4" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 7 ° per Side, 3/16" Small Dia, 1-1/4" LOC, 3 Flutes, Solid Carbide,...

SGS 32339 Tapered End Mill: 7 ° per Side, 3/16" Small Dia, 1-1/4" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 7 ° per Side, 3/16" Small Dia, 1-1/4" LOC, 3 Flutes, Solid Carbide, Square End 1/2" Shank Dia, 4" OAL, Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!

SGS 32341 Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End...

SGS 32341 Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End Tapered End Mill: 10 ° per Side, 1/8" Small Dia, 1" LOC, 3 Flutes, Solid Carbide, Square End 1/2" Shank Dia, 4" OAL, Uncoated, Series 23 (MOQ=1, Pkg Qty=1)Not Cancelable or Returnable!